Flexible equipment for the next generation of test and measurement.
Measure more with less
Moku:Lab is a reconfigurable hardware platform that combines the digital signal processing power of an FPGA with versatile analog inputs and outputs. This simplifies your workflow by giving you access to 12 high-performance instruments that enable you to measure what you need when you need.
Inputs
Dual DC to 200 MHz, 500 MSa/s
Outputs
Dual DC to 300 MHz, 1 GSa/s
Impedance
50 Ω / 1 MΩ
Input coupling
AC / DC
Input voltage noise
Better than 30 nV/√Hz above 100 kHz
Timebase accuracy
Better than 500 ppb
Moku:Lab features a suite of twelve instruments
Replace multiple pieces of equipment with a single device at a fraction of the cost.
Lock-in Amplifier
Arbitrary Waveform Generator
Oscilloscope
Frequency
Response Analyzer
Waveform Generator
PID Controller
Phasemeter
Data Logger
Spectrum Analyzer
Digital Filter Box
Laser Lock Box
FIR Filter Builder
Analog I/O
| Analog inputs | Channels | 2 |
|---|---|---|
| Bandwidth (-3 dB) | 200 MHz into 50 Ω | |
| Sampling rate | 500 MS/s per channel | |
| Resolution | 12-bit | |
| Maximum voltage range | 10 Vpp into 50 Ω with 20 dB attenuation | |
| Input impedance | 50 Ω / 1 MΩ | |
| Input coupling | AC / DC | |
| AC coupling corner (-3 dB) | 100 Hz into 50 Ω / 30 Hz into 1 M Ω | |
| SNR | 60 dBFS (per sample) | |
| Input referred noise | 30 nV/√Hz above 100 kHz | |
| Connector | BNC | |
| Analog outputs | Channels | 2 |
| Bandwidth (-3 dB) | >300 MHz | |
| Sampling rate | 1 GSa/s per channel | |
| Resolution | 16-bit | |
| Voltage range | 2 Vpp into 50 Ω | |
| Output impedance | 50 Ω | |
| Output coupling | DC | |
| Connector | BNC |
External trigger input
| External trigger | Trigger waveform | TTL compatible |
|---|---|---|
| Trigger bandwidth | DC to 5 MHz | |
| Trigger impedance | Hi-Z | |
| Min trigger level | 1.8 V | |
| Max trigger level | 5 V | |
| Connector | BNC |
Clock reference
| On-board clock | Frequency | 10 MHz |
|---|---|---|
| Stability | < 500 ppb | |
| 10 MHz reference input | Expected waveforms | Sine / square |
| Frequency | 10 MHz ± 250 kHz | |
| Input range | -10 dBm to +10 dBm | |
| Connector | BNC | |
| 10 MHz reference output | Waveform type | Square |
| Output frequency | 10 MHz | |
| Output level | -3 dBm | |
| Connector | BNC |
Specs
- Moku:Lab Spec Sheet - Download
Getting Started
- Moku:Lab Quick Start Guide - Download
Datasheets
- Moku:Lab's Arbitrary Waveform Generator Datasheet - Download
- Moku:Lab's Data Logger Datasheet - Download
- Moku:Lab's Digital Filter Box Datasheet - Download
- Moku:Lab's FIR Filter Builder Datasheet - Download
- Moku:Lab's Frequency Response Analyzer Datasheet - Download
- Moku:Lab's Laser Lock Box Datasheet - Download
- Moku:Lab's Lock-in Amplifier Datasheet - Download
- Moku:Lab's Oscilloscope Datasheet - Download
- Moku:Lab's Phasemeter Datasheet - Download
- Moku:Lab's PID Controller Datasheet - Download
- Moku:Lab's Spectrum Analyzer Datasheet - Download
- Moku:Lab's Waveform Generator Datasheet - Download
User Manuals
- Moku:Lab's Arbitrary Waveform Generator Manual - Download
- Moku:Lab's Data Logger User Manual - Download
- Moku:Lab's Digital Filter Box User Manual - Download
- Moku:Lab's FIR Filter Builder User Manual - Download
- Moku:Lab's Frequency Response Analyzer Manual - Download
- Moku:Lab's Laser Lock Box User Manual - Download
- Moku:Lab's Lock-in Amplifier User Manual - Download
- Moku:Lab's Oscilloscope User Manual - Download
- Moku:Lab's Phasemeter User Manual - Download
- Moku:Lab's PID Controller User Manual - Download
- Moku:Lab's Spectrum Analyzer User Manual - Download
- Moku:Lab's Waveform Generator User Manual - Download